Burner Covers

Burner Cover – Square

Although rain won’t damage the burner as it’s made from stainless steel, it can get into the burner jets and block them, making it difficult to light when wet. Manufactured from heavy gauge brush polished stainless steel.

  • 65cms x 65cms by 5cms high.
  • Rubber edging strip to protect your stone
  • Completely flat with no ugly handles

Suitable for the square BrightStar™ burner and Capella FirePit

Note: Allow the burner to cool down overnight before replacing the cover. The burner will remain quite hot for some time after use, and the heat could discolour the covers polished finish.

Square Cover – €80 HT

No Delivery charge if ordered with burner or FirePit (France métropolitaine & Monaco)

 

Burner Cover – Rectangular

Gas Firepit Rectangular Weather Cover

Although rain won’t damage the burner as it’s made from stainless steel, it can get into the burner jets and block them, making it difficult to light when wet. Manufactured from heavy gauge brush polished stainless steel.

  • 105cms x 35cms by 5cms high.
  • Rubber edging strip to protect your stone
  • Completely flat with no ugly handles

Suitable for the rectangular BrightStar™ burner.

Note: Allow the burner to cool down overnight before replacing the cover. The burner will remain quite hot for some time after use, and the heat could discolour the covers finish.

Rectangular Cover – €80 HT

No Delivery charge if ordered with burner (France métropolitaine & Monaco)

 

Burner Cover – Round

Although rain won’t damage the burner as it’s made from stainless steel, it can get into the burner jets and block them, making it difficult to light when wet. Manufactured from one piece of aluminium so no welds, and finished in grey hammer powder coat.

    • 65cms x 65cms by 5cms high.
    • Rubber edging strip to protect your stone
    • Completely flat with no ugly handles

    Suitable for the round BrightStar™ burner and Arcturus FirePit table

Note: Allow the burner to cool down overnight before replacing the cover. The burner will remain quite hot for some time after use, and the heat could discolour the covers finish.

Round Cover – €90 HT

No Delivery charge if ordered with burner or FirePit (France métropolitaine & Monaco)

 

Burner Cover – Octagonal

Although rain won’t damage the burner as it’s made from stainless steel, it can get into the burner jets and block them, making it difficult to light when wet. Manufactured from heavy gauge brush polished stainless steel.

 

  • 65cms x 65cms by 5cms high.
  • Rubber edging strip to protect your stone
  • Completely flat with no ugly handles

Suitable for the Octagonal BrightStar™ burner

Note: Allow the burner to cool down overnight before replacing the cover. The burner will remain quite hot for some time after use, and the heat could discolour the covers finish.

Octagonal Cover – €100 HT

No Delivery charge if ordered with burner (France métropolitaine & Monaco)

 

Burner Cover – Vega

Vega-Cover1This cover is for our Vega portable FirePit.  Although the Vega is usually stored inside when not being used, there are times when a cover would be useful.  Manufactured from heavy gauge brush polished stainless steel.

  • 58cms x 58cms by 8cms high.
  • Rubber edging strip to protect your Vega FirePit
  • Completely flat with no ugly handles

Suitable for the  Vega portable FirePit only.

Note: Allow the burner to cool down overnight before replacing the cover. The burner will remain quite hot for some time after use, and the heat could discolour the covers polished finish.

Vega Cover – €80 HT

No Delivery charge if ordered with FirePit (France métropolitaine & Monaco)